Technical Indicators of Light Touch Switch with Lamp
Release time：2019-01-27 Clicks： Click
We all need to know the technical specifications of light touch switch. We will introduce the details in detail below.
What are the main technical indicators of light touch switch?
1. The manufacturer of light touch switch with lamp introduces that when welding terminals, if the load is applied on the terminals, there will be loosening, deformation and deterioration of electrical characteristics due to different conditions. Please pay attention to it when using.
2. When using through-hole PCBs and PCBs other than those recommended, due to the change of thermal stress, please confirm the welding conditions in advance.
3. When welding twice, please do it after the first welding part is restored to normal temperature. Continuous heating may deform the periphery, loosen the terminals, drop off and reduce the electrical characteristics.
4. As for the setting of welding conditions, it is necessary to confirm the actual batch production conditions.
5. This product is designed and manufactured on the premise of DC resistance load. When using other loads (inductive load (L), capacitive load?), please confirm separately.
6. Installation holes and modes of printed circuit boards, please refer to the recommended dimensions recorded in the product drawings.
7. This switch should be used for the structure of press switch operated directly by human. Please do not use for mechanical testing function. For detection function, please use our sensing switch.
8. When the switch is operated, if more than the specified load is applied, the switch will be damaged. Please be careful not to exert the above force on the switch.
9. Avoid side-by-side operation.
10. Light touch switch manufacturer analysis, for the flat shaft pole type, try to press the switch center. For hinged structures, when pressed, the position of the axle rod will move. Please pay special attention to it.