Attention should be paid to heat dissipation when touching switch lightly
Release time：2018-12-27 Clicks： Click
When touching the switch lightly, we should pay attention to heat dissipation. If we do not pay attention to heat dissipation, what problems will it cause? Let's give you a detailed introduction.
Many customers and consumers will reflect this problem, that is to say, a switch he can not press after the furnace is hot, so it will cause a lot, unfortunately, what kind of phenomenon is this? Why does this happen? There is a phenomenon that the sealing performance of the switch is not very good. When there is a certain problem in the sealing performance, it will lead to some debris entering the inside of the switch. Then the problem will arise. Sometimes it will not move or press down. So we suggest that some big customers pay attention to this problem in the process of producing this kind of product. Don't mention that our side buttons are clear. Switches are the easiest thing to encounter this problem, and they are also the most frequently encountered situation. Sometimes it is very difficult to tell our customers clearly, so some experienced manufacturers will be very good to eliminate this problem directly. These are the most common problems of our clear switch. These problems are not minor problems. If there is a place on business, it will cause our button to press or a series of other problems.
We must pay attention to the heat dissipation of electronic products. In wet weather, it is better not to let him oxidize. There are many consumers who will take the switch apart and find a small black spot on the shrapnel. So what is this small black spot? In fact, this kid's black spot is the result of the shrapnel oxidation. So here we remind you to always use electronic products in a relatively dry place, because in a relatively dry place, our electronic products will not be easily oxidized, and in a dry place can also ensure that our products have a good use effect.
We must pay attention to these details in our life, and do not let these details affect the use of our products. At the same time, I hope that more and more manufacturers can pay attention to these real problems, we must find ways to eliminate the situation of these products.